U-PVC Pipe Adhesive

We are engaged in manufacturing and supplying good quality U-PVC Pipe Adhesive, to our clients. Our soul aim is to deliver best quality products as per the set standard of the industry. By offering a wide range, we make sure that our customers remain completely satisfied.

Process of Usage:

• The end should be cleaned and the pipe should be cut of required length

• The cut edge should be chamfered on the pipe for easy entry

• The depth of insertion on the pipe end should be marked

• The pipe insertion surface should be roughened (Externally) and the socket of the fitting should be roughened (Internally) by using emery paper

• A thin coat of U-PVC Pipe Adhesive, should be applied on the roughened surface with a brush

• Excess solvent cement should be avoided

• The pipe end should be inserted fully inside the socket fitting and then it should be turned at 90 degrees, for about 3 minutes

• For a proper and permanent joint, it should be cured for 24 hours